government polytechnic college adoor
Manakkala.P.O,Pathanamthitta Dist: Pin-691551,
Kerala Phone/FAX :04734 231500(Principal)
Phone:04734 231776(Office)
Website:www.gptcadoor.org Email:gptcadr@gmail.com
IEDC
follow us
Student Section
Flash News
Student Section
Downloads
Important G.O s & Circulars
- important telephone nos of JCTE Office,Tvpm
- Important office order from academic section (C1) >new guide lines to students ,2017-18
- REVISION OF CURRICULUM – LIST OF ADDITIONAL SUBJECTS IN THE REVISION 2015 TO BE PASSED BY STUDENTS UNDER REVISION 2010 SCHEME WHO CHANGE OVER TO REVISION 2015 SCHEME – APPROVED - ORDER
- Circular from DTE> GUIDELINES FOR STUDY TOUR FOR POLYTECHNIC COLLEGE STUDENTS-Reg
- Higher Education - Technical - Diploma Courses - perrrissible duration for acquiring Diploma - enhanced - orders issued
- Govt.order> refund of Revaluation fees for eligible students-
- circular from DTE- Condonation to students-guidelines
- LET, 2017 > prospectus and guidelines
- Govt.order from H.edn > smooth functioning of college campus
- Govt.order>> Green Protocol regarding
- Govt.Order_ Green Protocol regarding
- Transfer - Stdents-Self financing Course
- State board of Technical Education Reconstituted
- Directions to publish College Magazine
- Govt.Order> Guidelines for benefits from fisheries Dept
- General Notice to all students from GPRC,ADOOR> (C1)Academic section
- Order from GPTC,ADOOR> Academic details & Name of Class tutors -Reg:
- govt.circular -Rules &Regulations for smooth functioning of college campus&Hostel
- Guidelines for scheme change >>from JCTE
- important instructions to the candidate > for Diploma engg/Technology examination
- govt order-> Non creamy layer certificate for SEBC APPLICANTS to professinal degree course (guidelines,etc)
- Manual ( latest) > inter poly arts festival
- circular from DTE(Latest)>> Institution transfer of diploma engg students in S2,S3 Semesters
- ACADEMIC CA LENDER,2015-16- EVEN SEMESTER
- ACADEMIC CA LENDER,2015-16- EVEN SEMESTER
- Govt .Order >Annual Income of KPCR fees concession
- Rules &Regulations for smooth functioning > college campuses
- Bye-law of Students Union Election & Magazine editorial board
- Govt.Order- Equivalency of Diploma in Insrumentation
- circular from DTE>> Exemption of S.C Students to remit PTA Fund
- CIRCULAR FROM GPTC,ADOOR> (page-2 ) Important GUIDELINES to Students ,Page -1
- CIRCULAR FROM GPTC,ADOOR>Important GUIDELINES to Students ,Page -1
- Important notice to all students
- GENERAL NOTICE & GUIDELINES TO ALL PUBLIC & STUDENTS> FROM GPTC,ADOOR
- GENERAL NOTICE & GUIDELINES TO ALL PUBLIC & STUDENTS> FROM GPTC,ADOOR
- Rules & regulations,1& 2 semester syllabus of curriculum revision,2015
- circular from DTE>> Institution transfer of diploma engg students in S2,S3 Semesters
- circular from SDC,Kalammassery,apprentice reg-2
- Revised fees structure for regular diploma programme,2015-16 admission
- Govt.order--Revision of curriculum,2015
- Diploma engg:Examinations- details of fees &Head of A/C for various purpose
- Polytechnic college admission 2015--PROSPECTUS
- Study Tour- new guidelines from DTE,Thiruvananthapuram
- list of students2014-15 -BLOOD GROUPING(GROUP WISE LIST
- Diploma engg:Examinations- G.O-Concession for Physically Challanged STUDENTS
- Diploma engg:Examinations- details of fees &Head of A/C for various purpose
- Govt Order-Students educational cocession-KPCR-new limit -G.O
- Exam - related Queries >Technical examination Manual
- How to apply for various certificates obtained from JC Tech Examination Office ,Thiruvananthapuram
- Semester registration link
- Order from DTE-reg CGPA calculation
- G.O : Enhancement of various Examination Fees for Diploma courses w.e.f 01.01.2014
- G.O : Enhanced rate of fees for diploma courses
- Govt Order-Grace marks-Inter Polytechnic Athletic meet
- G.O> Restriction of Mobile Phone use in educational Institutions
Important forms
- Format of Request for Permission to Conduct Student Activities at Govt. Institutes Under DTE Kerala (4)
- Alumini Membership form GPTC ADOOR
- Diploma exam -self declaration form by the candidate
- Inter Poly Transfer application format
- OMR SHEET FOR DIPLOMA EXAMINATION> MODEL
- Students Identity Card form ( modified form)
- Undertaking of applicant to change scheme of examination
- Treasury Chalan form (pdf form) > TR.12
- Application for multi purpose (general forms) to Village Office
- Application for Non Creamy Layer Certificate from Thaluk Office
- Statement along with application for Second Condonation ANNEXURE
- Railway season ticket form of undertaking
- readmissionform
- APPLICATION FOR READMISSION>>Application Form & Anneeture
- APPLICATION FOR INSTITUTION TRANSFER
- Statement of Condo nation of Attendance( to be attached along with Application to condonation of attendance)
- Application for Non -Creamy layer certificate from Taluk Office
- Application (Malayalam) for various certificates from Taluk,Panchayath and village Offices
- GPTC,Adoor > College emblem for printing
- FORM > CONDUCT CERTIFICATE (GENERAL FORM )
- Application for Apprentice registration to S DC,Kalamassery
- LIC of India- NEFT mandate form-1- editable form
- LIC of India- NEFT mandate form for Policy holders
- Application for revaluation to JCTE,Thiruvananthapuram
- Application for Migration Certificate issued from JCTE,Thiruvananthapuram
- Application for Duplicate MARKLIST issued from JCTE,Thiruvananthapuram
- Application for Duplicate qualification Certificate issued from JCTE,Thiruvananthapuram
- Non Creamy layer certificate- Poly ADMISSION -2015
- Student ID card Application
- Application for Evening Diploma Admission
- Important Forms (16 forms)
- Application For Re-admission >application & anneture
- Medical Fitness Certificate
- Application For Condonation Of Attendance
- Apprentice Registration Form
- Annexure Anti Ragging Declaration
- Students BIO DATA Form-at the time of joining
- Admission HOFS Slip-exl
- Application For Receiving SSLC (Temporary)
- Application For refund of Caution Deposit (C D)
- Application For T.C -cum No dues Form -for Architecture students
- Application For T.C- cum No Dues Form- for Polymer Technology students
- Application for T.C - cum No Dues Form- Mechanical Engg: Students
Learning Materials Architecture
- S6 Landscape Architecture (Rev 2015) Apr 2019
- Construction Management & Safety Engineering Module-I
- Construction Management & Safety Engineering Module-II
- Construction Management & Safety Engineering Module-III
- Construction Management & Safety Engineering Module-IV
- QUANTITY ANALYSIS | BUILDING ESTIMATE | BASICS | CENTER LINE METHOD | CIVIL ENGINEERING | MALAYALAM
- Centre Line Method
- Building Estimation ¦¦ House Estimation
- What is Estimate? I Malayalam
- Cubical Content Method Estimation | Estimation and costing
- How to Calculate Quantity of Bricks in Building
- S4-Working drawing-corrugated sheet-Last Module
- WORKING DRAWING 1 Notes
- History Of Architecture-S4- Notes- Module 4-padmanabhapuram palace
- Palace of wonders- Padmanabhapuram
- Architectural drawing S4- Notes
- Introduction to Frank Lloyd Wright
- How Delhi became New Delhi? \ S6 Modern Architecture
- Talking History | New Delhi: The Capital City\ S6 Modern Architecture
- Architecture in Modern India\ S6 Modern Architecture
- Ink texturing - Architecture Daily Sketches
- How to Draw in 2-Point Perspective: Modern House
- How to Draw Using 1-Point Perspective: Narrated Step by Step
- Pen and Ink Architectural Rendering - Rapid Sketching (time-lapsed)
- How to draw architecture with ink & wash - speed drawing
- Isometric view
- Isometric view Question
- Isometric View Example
- Isometric View | Problem
- Isometric Projection Example #Engineering Drawing
- Isometric view question
- Isometric View | Problem
- Isometric view Question
- Diagonal Scales Problem
- First Angle Vs Third Angle Projection
- Scales Introduction
- Classification of Scales on the basis of RF
- ENGG. DRAWING - SCALES - Intro. & Tips to Get Good Marks in SCALES by following Rules- Part 1.
- HOW TO DRAW PLAIN SCALE (QUE.NO.1) | UNIT : ENGINEERING SCALE
- HOW TO DRAW DIAGONAL SCALE (QUE.NO.1) | UNIT : ENGINEERING SCALE
- Theory Of Strucures I- Notes
- Working Drawing I Notes
- S4 Interior Design
- S4 Interior design
- S6 Modern Architecture
- CME Notes- Plastering BCE
- CME Notes- Flooring
- CME Notes- Roofs
- CME Notes- Doors
- CME Notes- Window
- CME Notes- Scaffolding
- CME Notes- FOUNDATION
- CME Notes- DPC
- CME Notes- FORM WORK
- S5 History Of Architecture-II Rev 2010 APR 2018
- National Aptitude Test in Architecture-LINK
- Master Plan, Development Plan, Structure Plan
- Sustainable architecture-sustainable planning & design
- Sustainable architecture-sustainable builing materials new
- Sustainable architecture-Recycling -Reuse
- North Indian Temples-Notes
- Kerala Architecture-Notes
- Islamic Architecture-Notes
- Dept of Architecture- Notes on Bathrom Fittings-Notes
- Basic Surveying -Demonstration Vedio
- Surveying Theodolite/Total Station- Demonstration Vedio
- useful Architecture websites
- Daily news on Architecture-drawings(Link)
- Latest trends & news (Link)
- Latest news on Architecture(Link)
- Basic Surveying
- civil engg drawing
- Lecture note -surveying
- City planning and realities-study
- Ergonomics-Notes
- Design Elements-notes
- Binocular Vision-notes
- Ancient Egyptian architecture-notes
- LET examination-Previous Question Papers
- An Introduction to Surface Development-notes
Learning Materials General Workshop
Learning materials Mechanical engg
- Automative Lab- Lab Manual
- Metullurgy & Machine Tools Module 1
- Metullurgy & Machine Tools Module 2
- Metullurgy & Machine Tools Module 3
- Metullurgy & Machine Tools Module 3
- Manufacturing process Module 1 notes
- Manufacturing process Module 2 notes
- Manufacturing process Module 3 notes
- Manufacturing process Module 3 notes
- Manufacturing process Module 3 notes
- Manufacturing process Module 4 notes
- Basic Mechanical Engineering notes
- Metallurgy and Machine Tool Module I & II
- Metallurgy and Machine Tool Module III & IV
- Applied Mechanics and Strength of Materials -S4 - Module 4
- Hydraulic Machines S6- 4th mod last portion notes
- Refrigeration and Air conditioning \ S6 Mechanical Engineering\ Module 4
- Boiler- S2-Basic mechanical engineering
- Hydraulic Machines-Module 2 Notes -S6
- Hydraulic Machines Notes-S6- MOD 1 - 2015 REVISION
- Metallurgy & Machine Tools S4 - Notes
- Refrgeration & Air conditioning -Psychrometry-S6 -Module 3
- Psychrometry Problems
- Basic Mechanical Engineering-Boiler Mounting& Accesories
- LIFE SKILL-10 PRINCIPLES
- LIFE SKILL- What is really a team?
- LIFE SKILL- Interview techniques-2
- LIFE SKILL- Interview techniques-1
- LIFE SKILL- Interesting management stories
- LIFE SKILL- 10 Principles
- Tensile Test & Stress strain Curve - Demonstration Vedio
- An Introduction to Surface Development
- Orthographic-projection-2-engineering108
Learning materials Polymer Technology
- Chemical Engineering Module III
- Chemical Engineering Module II
- Plastic Products Module - III
- Plastic Products Module - IV
- Technology of Elastomers Module I
- Technology of Elastomers Module II
- Technology of Elastomers Module III
- Technology of Elastomers Module IV
- Polymer Processing & Machinery Module I
- Polymer Processing & Machinery Module II
- Polymer Processing & Machinery Module III
- Polymer Processing & Machinery Module IV
- Chemical Engineering Module I
- Chemical Engineering Module IV
- Speciality Polymers Notes Unite - I
- Speciality Polymers Notes Unite - II
- Speciality Polymers Notes Unite - III
- Speciality Polymers Notes Unite - IV
- Transfer molding- S6 - Notes
- Compression molding- S6- Notes
- Blow molding- S6 - Notes
- Injection molding- S6-Notes
- Extrusion-S6-Notes
- Thermoforming processes-S6-Notes
- Polymer concrete\ Speciality Polymers \ Module 4
- Polymeric optical fibre cable\ Speciality Polymers \ Module 4
- Polymers used as rocket propellents \ Speciality Polymers \ Module 4
- Descriptive Engg S4-module-4-Boiler Mounting& Accesories
- Isometric-to-Orthographics-engineering108
Model Questions Architecture
- S4 Architectural Drawing 2 (REV 2021) APR 2023 QP
- S4 Architectural Drawing 2 (REV 2021) APR 2023 KEY
- S4 History Of Architecture (REV 2021) APR 2023 QP
- S4 History Of Architecture (REV 2021) APR 2023 KEY
- Surveying For Architecture(REV 2021) APR 2023 QP
- Surveying For Architecture(REV 2021) APR 2023 KEY
- S6 Building Services (Rev 2015) Apr 2018
- S6 Traditional Architecture Rev 2015 Nov 2018
- S6 Traditional Architecture Rev 2015 April 2019
- S6 Traditional Architecture Rev 2015 April 2018
- S6 Structural Design II Rev 2015 Oct 2018
- S6 Structural Design II Rev 2015 April 2019
- S6 Building Services (Rev 2015) Nov 2018
- S6 Building Services (Rev 2015) Apr 2019
- S6 Landscape Architecture (Rev 2015) Apr 2018
- S6 Landscape Architecture (Rev 2015) Nov 2018
- S6 Landscape Architecture (Rev 2015) Apr 2019
- S3 Theory Of Structures I- Rev 2015- Apr 2019
- S3 Construction Materials and Engineering (Rev 2015) APR 2019
- S3 Construction Materials and Engineering (Rev 2015) APR 2018
- S5 Construction Management & Safety Engineering (Rev 2015) APR 2018
- S3 Theory of Structures I -(3013)- (REV 2015)APR 2018
- S4 Theory of Structures II (REV 2015)APR 2018
- S6 STRUCTURAL DESIGN II 6013 (REV 2015) APR 2018
- S3 ENVIORNMENTAL SCIENCE AND DISASTER MANAGEMENT REV 2015 APR 2018
- S5 History Of Architecture-II Rev 2015 Apr 2018
- S5 History Of Architecture-II Rev 2010 APR 2018
- S5 History Of Architecture-II Rev 2010 Oct 2017
- S3 Architecture April 2018 Surveying For Architecture
- S5 Arch History of Architecture Oct 2017 rev 2015
- S4 Theory of Strucures -II -Rev 2010-April 2017
- S4 Working Drawing- I -Rev 2015-April 2017
- S4 Architectural Drawing II- Rev 2015 - April 2017
- S4 Quantity Survey-I-Rev 2015-April 2017
- S4 Interior Design -Rev 2015-April 2017
- S4 History Of Architecture -I -Rev 2015-April 2017
- S4 Theory of Strucures -II -Rev 2015-April 2017
- S6 Arch Working Drawing-- Rev 2010 - Oct 2017
- S5 Arch Working Drawing- Rev 2015- Oct 2017
- S3 Arch surveying and Architecture- Rev 15 -Apr 17
- S3 Arch Theory Of Structures- Rev 15- Apr 2017
- S3 Arch construction materials and Engineering -Rev 15 -Apr 17
- S3 Arch Climatology -Rev 2015- Oct 2017
- S3 arch climatology -Rev 15 -Apr 2017
- S3 Arch Architectural Drawing I- Rev 15- Apr 17
- S3 Arch Architectural Drawing I - Rev 2010 - March 2016
- S3 Arch Architectural drawing- Rev 15 -Oct 2017
- ENGINEERING GRAPHICS - MODEL QUESTION
- S2 - Principles Of Design -Model question
- S6-Working Drawing -Rev 2010 - March 2015
- S6 Sustainable Architecture ( Elective)-Rev 2010- March2015
- S6 Quantity Surveying /Rev 2010/ March2015
- S6 Interior Design/Rev 2010/March 2015
- S6 Enviornmental Science & Disaster Management -Rev 2010 -March2015
- S6 Arch Cost Effective Construction & Green Building (Elective)- Rev 2010-March 2015
- S5 Working Drawing II -Rev 2010-March 2015
- S5 Structural Design -Rev 2010-March 2015
- S5 HISTORY OF' ARCHITECTURE _Rev 2010/March2015
- S5 Construction Management & Safety Engineering -Rev 2010-March 2015
- S5 Architectural Drawing -III -Rev 2010-March 2015
- S5 Landscape Architecture -Rev 2010- March 2015
- S4 Working Drawing- I -Rev 2010-March 2015
- S4 Town Planing-Rev 2010- March 2015
- S4 Theory of Structures-II/REV 2010/March 2015
- S4 History Of Architecture -I -Rev 2010-March 2015
- S4 Climatology -Rev 2010-March 2015
- S4 Architectural Drawing II- Rev 2010 - March 2015
- s4 History of Arc page No.2 2015/March
- S4 History of Architecture -Rev 2010 - March 2015
- S3 Surveying II -Rev 2010 - March 2015
- S3 Principles of Design -Rev 2010 - March 2015
- S3 construction materials and Engineering - Rev 2010 - March 2015
- S3 Architectural drawing - Rev 2010 - March 2015
- S3 Theory Of Structures - Rev 2010 - March 2015
- S4-Climatology-Oct 2013
- S4- Architectural drawing II March 2012
- S4-Townplanning- Oct 2013
- S4-Working Drawing-I- Rev 2010-Oct 2012
- S4-Architectural Drawing-II- March 2013
- S4-History Of Architecture-I- Oct 2012
- S4-Climatology- Oct 2012
- S2-Surveying-I- -Rev 2010 - Oct 2012
- S2-Surveying-I- -Rev 2010 - Oct 2013
- S3-Architectural Drawing-I- -Rev 2010 - Oct 2012
- S3-Architectural Drawing-I--Rev 2010 - Oct 2013
- S3-Construction Materials & Engineering-I- Oct 2013
- S3-Construction Materials & Engineering- Oct 2012
- S3-Principles Of Design--Rev 2010 - Oct 2012
- S3-Principles Of Design- -Rev 2010 - Oct 2013
- S3-Surveying-II--Rev 2010 - Oct 2012
- S3-Surveying-II- -Rev 2010 - Oct 2013
- S3-Theory Of Structures-I- -Rev 2010 - Oct 2012
- S3-Theory Of Structures-I- -Rev 2010 - Oct 2013
- S4-Architectural Drawing-II--Rev 2010 - Oct 2012
- S4-Architectural Drawing-II--Rev 2010 - Oct 2013
- S4-History Of Architecture-I- -Rev 2010 - Oct 2013
- S4-Quantity Surveying-I- -Rev 2010 - Oct 2013
- S4-Theory Of Structures-II--Rev 2010 - Oct 2012
- S4-Theory Of Structures-II--Rev 2010 - Oct 2013
- S4- Townplanning --Rev 2010 - Oct2012
- S4-Working Drawing-I- -Rev 2010 - March 2013
- S4-Working Drawing-I--Rev 2010 - Oct 2013
- S5-Working Drawing-II --Rev 2010 - Oct 2013
- S5-Working Drawing-II --Rev 2010 - Oct 2012
- S5-Structural Design --Rev 2010 - Oct 2013
- S5-Structural Design - -Rev 2010 - Oct 2012
- S5-Landscape Architecture- -Rev 2010 - Oct 2013
- S5-Landscape Architecture--Rev 2010 - Oct 2012
- S5-History Of Architecture-II --Rev 2010 - Oct 2013
- S5-History Of Architecture -II- -Rev 2010 - Oct 2012
- S5-Architectural Drawing -III --Rev 2010 - Oct 2013
- S5-Architectural Drawing -III --Rev 2010 - Oct 2012
- S5- Construction Management & sefety Engineering - -Rev 2010 - Oct 2013
- S5- Construction Management & sefety Engineering --Rev 2010 - Oct 2012
- S6-Working Drawiing-III-Rev 2010 - Oct 2013
- S6-Sustainable Architecture(Elective) -Rev 2010 - Oct 2013
- S6-Sustainable Architecture(Elective) -Rev 2010 -March 2013
- S6-Quantity Surveying--Rev 2010 -Oct 2013
- S6- Enviornmental Science & Disaster Management-Rev 2010 - Oct 2013
- S6-Interior Design-Rev 2010 - Oct 2013
- S6-Working Drawing -Rev 2010 - March 2013
- 5013
- 5012
- 5002
- S6-Working Drawing-III-4016-Model Question
- S6- Enviornmental Science & Disaster Management-Model Question
Model Questions Mechanical engg
- Hydraulic Machines S6- 4th mod last portion notes
- S6 Industrial Automation And Mechatronics -Rev 15- Apr 2018
- S6 Industrial Automation And Mechatronics -Rev 15- Apr 2019
- S6 Industrial Automation And Mechatronics -Rev 15- Apr 2019-Answer key
- Advanced Production Process-S6-Apr 2019-Rev 15
- Advanced Production Process-S6-Apr 2019-Answer key
- Refrgeration & Air conditioning-S6-Apr 2019-Rev 15
- Refrgeration & Air conditioning-S6-Apr 2019-Answer key
- Hydraulic Machine-Oct 2018 -S6-REV 2015
- Hydraulic Machine-Oct 2018 -Answer key
- Hydraulic Machine-April 2019 -Answer key
- Hydraulic Machine-April 2019 -S6-REV 2015
- S2 BASIC MACHANICAL ENGINEERING(REV 2015) APR 2019
- S5 Industrial Engineering Rev 15 Apr 2019
- S4 THERMAL ENGINEERING (REV 2015) APR 2019
- S3 -Fluid Mechanincs & Pneusmatics-- Rev 2015--Oct 2018
- S2 Basic Mechanical Engineering Rev 15 Oct 2018
- S6 Advanced Production Process Rev 15 Apr 2019
- S4 Advanced Production Process Rev 10 Oct 2018
- S4 Production Drawing Rev 15 Oct 2019
- S4 Production Drawing Rev 15 Oct 2018
- S5 Power plant Engg Rev15 Oct 2018
- S5 DESIGN OF MACHINE ELEMENTS ( REV 2015) Oct 2018
- S6 Industrial Automation And Mechatronics -Rev 15- Oct 2018
- S5 Industrial Automation And Mechatronics -Rev 10- Oct 2018
- S3 Mech Manufacturing Process Rev 15 Oct 2018
- S3 Mech Manufacturing Process Rev 10 Oct 2018
- S6 Industrial Automation And Mechatronics -Rev 15- Apr 2019
- S3 Electrical & Electronics Engg.-Rev 15-Apr 2019
- S4 Applied Mechanics and Strength of Materials (Rev 2015) APR 2018
- S4 Applied Mechanics and Strength of Materials (Rev 2015) APR 2018
- S4 Automobile Engineering (Rev 2015) APR 2018
- S5 Industrial Management & Safety (REV 2015) APR 2018
- S5 DESIGN OF MACHINE ELEMENTS ( REV 2015) APR 2018
- S4 THERMAL ENGINEERING (REV 2015) APR 2018
- S2 BASIC MACHANICAL ENGINEERING(REV 2015) APR 2018
- S6 REFREFRIGERATION & AIR CONDITIONING (REV 2015) APR 2018
- S6 HYDRAULIC MACHINES (REV 2015) APR 2018
- S3 ENVIORNMENTAL SCIENCE AND DISASTER MANAGEMENT REV 2015 APR 2018
- S3 FLUID MACHANICS& PNEUMATICS REV 2015 APR 2018
- S3 MACHINE DRAWING REV 2015 APR 2018
- S3 THERMAL ENGINEERING REV 2015 APR 2018
- S3 MANUFACTURING PROCESS REV 2015 APR 2018
- S2 Basic Mechanical Engg Rev 15 Oct 2017
- S3 Electrical & Electronics Engg Rev 15 oct 2017
- S3 Mech Environmental science & Disaster Management Rev 15 Oct 17
- S3 Mech Fluid Mechanics & Pneumatics Rev15 Oct 2017
- S3 Mech Machine Drawing Rev 15 Oct 2017
- S3 Mech Manufacturing Process Rev 15 Oct 2017
- S4 Mech Applied Mechanics & Strength Of Materials Rev 15 Oct 2017
- S4 Mech Applied Mechanics & Strength Of Materials Rev 2015 Apr 2017
- S4 Mech Automobile Engg Rev 15 Oct 2017
- S4 Mech Metallury & Machine Tools Rev 15 Oct 2017s
- S4 Mech Production Drawing Rev 10 April 2017
- S4 Mech Production Drawing Rev 15 Oct 2017
- S4 Mech Thermal Engg Rev 15 April 2017
- S4 Mech Thermal Engg Rev 15 Oct 2017
- S5 Design Of Machine Elements Rev15 Oct 2017
- S5 Industrial Engineering Rev 15 Oct 2017
- S5 Mech Power plant Engg Rev15 Oct 2017
- S3 Electrical & Electronics Engg-Rev 2010-March 2015
- S3 Machine Drawing-Rev 2015-Oct 2017
- S4 Production drawing-Rev 2010-Oct 2017
- ENGINEERING GRAPHICS
- S2 - BASIC MECHANICAL ENGINEERING
- S6 Refrigeration & Air Conditioning - Rev 2010-March 2015
- S5 Enviornmental Science & Disaster Management - Rev 2010-March 2015
- S6 Automobile Engg. - Rev 2010-March 2015
- S6 Advanced Production Process,- Rev 2010-March 2015
- S5 POWER PLANT ENGINEERING,- Rev 2010-March 2015
- S5 INDUSTRIAL ENGINEERING.- Rev 2010- /March 2015
- S5 INDUSTRIAL MANAGEMENT AND SAFETY - Rev 2010-March 2015
- S5 Design Of Machine Elements - Rev 2010-March 2015
- S4 Thermal Engineering - Rev 2010-March 2015
- S4 Production Drawing - Rev 2010- March 2015
- S4 Production Drawing - Rev 2010- March 2015
- S4 Hydraulic Machines - Rev 2010- March 2015
- S4 AM&SM 2015/ March
- S3 MD 2015/ March
- S3 M&MT 2015/ March
- S3 FM&P 2015/ March
- Rev-15 > Question paper pattern of English paper > for I semester
- Rev-15 > evaluation process of English > for I semester
- Rev-15 > Computer fundamentals > for I semester
- Rev-15 > MATHEMATICS > for I semester
- Rev-15 > PHYSICS > for I semester
- Rev-15 >CHEMISTRY > for I semester
- Rev-15 >ENGLISH for Isemester
- Model Question Paper - I semester (Revision 15)
- S3 -Applied Mechanics & Strength Of Materials--- Rev 2010-Oct 2012
- S3-Electrical & Electronics Engineering-- Rev 2010-Oct 2013
- S4 -Thermal Engineering-- Rev 2010--March 2013
- S4 -Thermal Engineering--- Rev 2010-Oct 2012
- S4-Production Drawing-- Rev 2010- Oct 2013
- S5-Design Of Mechine Elements--- Rev 2010-Oct 2013
- S6-Refrigeration & Air Conditioning--- Rev 2010-Oct 2013
- S2 -Manufacturing Process-- Rev 2010--March 2013
- S2 -Manufacturing Process-- Rev 2010--Oct 2013
- S3 -Applied Mechanics & Strength Of Materials-- Rev 2010--Oct 2013
- S3 -Fluid Mechanincs & Pneusmatics-- Rev 2010--Oct 2013
- S3 -Machine Drawing-- Rev 2010--Oct 2013
- S3-Machine Drawing- Rev 2010--March 2013
- S3 -Metallurgy & Machine Tools-- Rev 2010--Oct 2013
- S3-Metallurgy & Machine Tools- Rev 2010-- Oct 2012
- S4 -Thermal Engineering--- Rev 2010-Oct 2013
- S5 -Industrial Engineering -I-- Rev 2010-March 2013
- S5 -Industrial Engineering-- Rev 2010-Oct 2013
- S5 -Industrial Management & Safety-I-March 2013
- S5 -Industrial Management & Safety--Oct 2013
- S5 -Power Plant Engineering-Oct 2013
- S6 -Advanced Production Process --Oct 2013
- S6 -Automobile Engineering-March 2013
- S6 -Automobile Engineering --Oct 2013
- S6 -Industrial Automation & Mechatronics --Oct 2013
- S6 -Industrial Automation & Mechatronics --March 2013
- S6- Enviornmental Science & Disaster Management Model Question S6
Model Questions Polymer Technology
- S6 Speciality Polymers Rev 15 Oct 2019
- S3 Polymer Science- Rev 15 -Apr 2019
- S3 Natural Rubber Production- Rev 15 -Apr 2019
- S3 ENVIORNMENTAL SCIENCE AND DISASTER MANAGEMENT REV 2015 APR 2018
- S5 Industrial Management & Safety (REV 2015) APR 2018
- ENGINEERING GRAPHICS
- FUNDAMENTALS OF POLYMER SCIENCE
- Model Question Paper> ENGLISH -HI > SEM II(Revision 15)
- Model Question Paper -ENGLISH-II >for II-semester (Revision 15)
- s6 ES&DM 2015/March
- s5 TT 2015/March
- s5 PT 2015/March
- s5 IM&S 2015/March
- s5 F&C 2015/March
- s5 Chemical Engg. 2015/March
- s4 RP 2015/March
- s4 PPM & M 2015/March
- s4 latex tech 2015/March
- s4 Introduction To Mechanical Engg - Rev 2010-March 2015
- S3 Synthetic Rubber-- Rev 2010-March 2015
- S3 Natural Rubber Production - Rev 2010-March 2015
- S3 Fundamentals Of Electrical & Electonics Engg - Rev 2010-/March 2015
- s3 Technology of Elastomers - Rev 2010-March 2015
- Rev-15 > PHYSICS > for I semester
- Rev-15 > CHEMISTRY > for I semester
- Rev-15 > Computer fundamentals > for I semester
- Rev-15 > MATHEMATICS > for I semester
- Rev-15 > Question Pattern of English > for I semester
- Rev-15 > evaluation process of English > for I semester
- Rev-15 > ENGLISH > for I Semester
- S3- Technology Of Elastomers-March 2012
- S3-Synthetic Rubber-March 2012
- S4 -Latex Technology--March 2013
- S4- Latex Technology-Oct 2012
- S4- Rubber Products-March 2012
- S5- Chemical Engineering-Oct 2012
- S2 -Polymer Science--March 2013
- S2 -Polymer Science--Oct 2013
- S3-Synthetic Rubber- Rev 2010--March 2013
- S5 -Fibers and Composite -I-- Rev 2010-March 2013
- S5 -Industrial Management & Safety-I-M- Rev 2010-arch 2013
- S5 -Industrial Management & Safety-- Rev 2010--Oct 2013
- S6 -Plastic Products-March 2013
- S6 -Quality Assurance & Testing-- Rev 2010-March 2013
- 5086
- 5085
- 4099
- 4098
- S6- Enviornmental Science & Disaster Management-Model Question
General Section
- S1 Notes Commiunication Skills In English Module 1 (REV 21)
- S1 Notes Commiunication Skills In English Module 2 (REV 21)
- S1 Notes Commiunication Skills In English Module 3 (REV 21)
- S1 Notes Commiunication Skills In English Module 4 (REV 21)
- Engg Mechanics( REV 2021) APR 2023 QP
- Engg Mechanics( REV 2021) APR 2023 KEY
- Mathematics 2 (REV 2021) APR 2023 QP
- Mathematics 2 (REV 2021) APR 2023 KEY
- Applied Physics 2 (REV 2021) APR 2023 KEY
- Applied Physics 2 (REV 2021) APR 2023 QP
- Engg Graphics (REV 2021) NOV 2022
- Engg Graphics (REV 2021) NOV 2021
- Commiunication Skills In English I (REV 2021) NOV 2022
- Commiunication Skills In English I (REV 2021) NOV 2021
- Mathematics I (REV 2021) NOV 2022
- Mathematics I (REV 2021) NOV 2021
- Applied Physics (REV 2021) NOV 2022
- Applied Physics (REV 2021) NOV 2021
- Applied Chemistry (REV 2021) NOV 2022
- Applied Chemistry (REV 2021) NOV 2021
- Engineering Graphics-Dimensioning
- Engineering Graphics-Dimensioning
- Engineering Graphics-Projections
- Engineering Graphics-Orthographic Projection
- Health & Physical Education -Unit I
- Engineering Chemistry Semester 1 Module III notes
- Engineering Chemistry S2 Module 4 Notes
- Engineering Chemistry S2 Module 3 Notes
- English for Communication II- Notes and model question
- S2 Technical Mathematics-II Rev 2015 April 2018
- S2 Maths- Rev 15 -Oct 2018
- Life Skill 2 -Notes
- Engineering-physics-Notes-semester-2-revision-2015
- S1 Chemistry- Rev 15 -Oct 2018
- S2 Engineering Graphics Rev 10 Oct 2017
- S1 Engineering Chemistry I Rev 15 Oct 2017
- S2 Engineering Graphics A Rev 15 Apr 2018
- S2 Engineering Graphics B Rev 15 Apr 2018
- S2 Engineering Graphics Rev 10 April 2018
- S1 Applied Science Physics Rev 10 April 2018
- S1 Applied Science Physics Rev 10 April 2017
- S1 Applied Science Chemistry Rev 10 April 2018
- S2 Maths- Rev 15 -Apr 2019
- S1 Physics- Rev 15 -Oct 2018
- S1 Chemistry- Rev 15 -Apr 2019
- S1 Physics- Rev 15 -Apr 2019
- S2 Engineering Graphics-Rev 2015- Apr 2019 B
- S2 Engineering Graphics -Rev 2015- Apr 2019
- S2 Engineering Graphics -Rev 2015- Oct 2018
- S1 ENGLISH (REV 2015) MARCH 2016
- S1 MATHS (REV 2015) MARCH 2016
- S1 CHEMISTRY (REV 2015) MARCH 2016
- SI PHYSICS (REV 2015) MARCH 2016
- S2 ENGLISH (REV 2015) APR 2018
- S1 ENGLISH (REV 2015) APR 2018
- S1 MATHEMATICS (REV 2015) APR 2018
- S1 PHYSICS (REV 2015) APR 2018
- S2 PHYSICS (REV 2015) APR 2018
- S1 Engineering Chemistry -I Rev 15 Apr 2018
- S2 Engineering Chemistry -II Rev 15 Apr 2018
- S2 Technical Mathematics-II Rev 2010 April 2018
- S2 Programming Methodology Rev 10 Apr 2018
- S2 Applied Science -II Physics Rev 2010 April 2018
- S2 Applied Science -II Chemistry Rev 2010 April 2018
- S1 Technical Mathematics-1 Rev 2010 Oct 2017
- S1 English Rev 15 Oct 2017
- S2 Physics Rev 15 Oct 2017
- S1 Physics -Rev 2010- Oct 2017
- S1 Physics -Rev 2015- Oct 2017
- S2 Engineering Graphics -Rev 2015- Oct 2017
- S2 Physics- Rev 15- Apr 17
- S2 Maths- Rev 15- Apr 2017
- S2 English- Rev 2015- Apr 2017
- S2 English- Rev 10- Apr 2017
- S2 Chemistry- Rev 15- Apr 17
- S1 English- Rev 15- Apr 17
- S1 chemistry- Rev 15- Apr 2017
- S2 chemistry -Rev 15 -March 2016
- S2 English- Rev 15- March 2016
- S2 Physics -Rev 15- March 2016
- S1 Maths - -Rev 2015- April 2017
- S2 Programming Methodology -Rev 10- Oct 2017
- S2 Maths- Rev 15 -March 2016
- S2 Chemistry -Rev 15 -Oct 2017
- S1 Physics- Rev 15 -Apr 2017
- S2 Technical Maths II- Rev 2015- Oct 2017
- S2 Maths II -Rev 2010- Oct 2017
- S2 English II- Rev 2015 -Oct 2017
- S1 Technical Maths I --Rev 2015-Oct 2017
- Series Test I Time Table
- ENGINEERING PHYSICS - II
- Engineering Mathematics II
- II Semester English
- ENGLISH FOR COMMUNICATION – II
- Engineering Chemistry-II
- GPTC, ADOOR > Emblem in various size
- S2 Physics -Rev 2010/March 2015
- S2 Maths -Rev 2010/March 2015
- S2 Engineering Graphics- Rev 2010-March2015
- S2 English Rev 2010/March 2015
- S2 Chemistry- Rev 2010/March2015
- S2 Engineering Graphics -Rev 2010- March 2015
- S1 Technology In Society -Rev 2010- March 2015
- S1 Maths - -Rev 2010- March2015
- S1-Physics--Rev 2010- March 2015
- S1 ENGLISH -Rev 2010- March2015
- S1 Chemistry Rev 2010/March2015
- S1 General Engineering - Rev 2010 /March 2015/
- LET Exam 2011 Previous Question Paper
- LETExam 2015
- LIFE SKILL- LEARNING MATERIALS- Interview techniques
- Life Skill- Learning materials- the 7 UPS
- Life skill-leaning materials- 7 ways to Motivational work
- life skill-learning materials- Principles of life
- Life skill-leaning materials- Motivational story
- Life Skill- Learning materials-MEDITATION
- LIFE SKILL- LEARNING MATERIALS-Lesson from Ramayana
- life skill-learning materials-How to relax
- life skill-learning materials-Changing our -ve thoughts
- life skill-learning materials-Body language
- LIFE SKILL- Learning materials-ABC of motivation
- Ltfe skill-learning materials-AtoZ Motivation
- S1 -English-I --Rev 2010--Oct 2012
- S1 -English-I ---Rev 2010-March 2013
- S1 -English-I -Rev 2010---Oct 2013
- S1 -Technical Mathematics --I--Rev 2010-Oct 2012
- S1 -Technical Mathematics -I--Rev 2010-Oct 2013
- S1-Applied Science-I--Rev 2010- Oct 2012
- S1-Applied Science-I--Rev 2010- Oct 2013
- S1-Applied Science-I(Physics)- -Rev 2010-March 2013
- S1 -General Engineering --Rev 2010--Oct 2012
- S1 -General Engineering --Rev 2010--March 2013
- S1 -General Engineering --Rev 2010--Oct 2013
- S1 -Technology In Society--Rev 2010-Oct 2013
- S1 -Technology In Society--Rev 2010-Oct 2012
- S2-Technical Mathematics-II -Model Exam -GPTC ADOOR-March 2014
- S1-Question bank -Technical Maths II Unit I(Part I)
- S1-Question bank -Technical Maths II Unit II(Part I)
- S1-Question bank -Technical Maths II Unit II(Part II)
- S1-Question bank -Technical Maths II Unit III(Part I)
- S1-Question bank -Technical Maths II Unit III(Part II)
- S1-Question bank -Technical Maths II Unit IV(Part I)
- S1-Question bank -Technical Maths II Unit IV(Part II)
- S2-Question bank -Technical Maths II unit 1
- S2-Question bank -Technical Maths II unit 2
- S2-Question bank -Technical Maths II unit 3
- S2-Question bank -Technical Maths II unit 4
- S2-Engineering Graphics- -Rev 2010-October 2012
- S2 -Applied Science -Rev 2010-March 2014
- S2 -Applied Science -Chem--Rev 2010-march 2012
- S2-English-II--Rev 2010- Oct 2013
- S2-Technical Mathematics-II--Rev 2010- March 2013
- S2-Technical Mathematics-II--Rev 2010- Oct 2012
- S2-Technical Mathematics-II--Rev 2010- Oct 2013
- S2-Applied Science-II--Phy & Chem -Rev 2010- March 2013
- S2-AppliedScience-II--Phy & Chem -Rev 2010- Oct 2012
- S2-Applied Science-II Phy & Chem -Rev 2010- - Oct 2013
- S2-Engineering Graphics--Rev 2010- March 2013
- S2-Engineering Graphics- -Rev 2010- Oct 2013
- S2-Programming Methodology--Rev 2010- March 2013
- S1-Programming Methodology-Rev 2010- Oct 2013
- ENGLISH ADAPTED TEXT BOOK
- Lecture - 1 Introduction - Strength of Materials
- (Criminal Tendencies in Children)-LIfe skill Class Dr.Arun .B.Nair
- Video of Life skill class - By Dr.Arun.B.Nair
- Engg graphics-instrument drawing &lettering
- Engg Graphics-basic construction
- Engg graphics _Orthographic Projection
- Engg drawing-plane &solid geometry
- Projection-of-Points
- Projection-of-Point-and-lines
- Projection-of-planes-
- Using-Drawing-Tools
- Scale
- Removed-and-Revolved-Sections
- Projection-of-Solids
- Orthographic-projection-2-
- Orthographic-projection-1
- Machine-Parts-Engg Graphics
- locus-modified-Engg Graphics
- Lociof-points
- Isometric-to-Orthographics
- Engineering-Curves-
- Dimensioning
- Devlopment-of-Surfaces-in-Details-Engineering Graphics
- Devlopment-of-Surface-1-Engineering Graphics
- Syllabus > revision,2010
- Curriculam Development Centre, Kalamasseery
- tekerala.org
Quick links
Tender
Quotation
Previous
Qestion Papers
Links
Photo Gallery
Student - Alumini
-
Grievences Registration Form
-
SWAYAM